1/16" Long Carving Bit

1/16" Long Carving Bit

For fine detail Deep Carvings

Tapered, three flute, ¼ inch shaft, solid carbide, 1/16 inch ballnose, long carving bit. This bit is used for fine detail deep carving/raster operations.
LEARN MORE>

Specifications
• Max carving depth with this bit is 2.125 inch.
• Requires CarveTight Spindle System.
• Requires Project Designer PRO 2 or higher.

Our price: $79.99

SKULBCR062P

For fine detail Deep Carvings

Tapered, three flute, ¼ inch shaft, solid carbide, 1/16 inch ballnose, long carving bit. This bit is used for fine detail deep carving/raster operations.
LEARN MORE>

Specifications
• Max carving depth with this bit is 2.125 inch.
• Requires CarveTight Spindle System.
• Requires Project Designer PRO 2 or higher.

SEE MORE ABOUT THE LONG CARVING BITS HERE

To change the default 1/16" carving bit to another carving bit, you will go in the Designer Software to EDIT > BOARD SETTINGS > PATTERN BIT and select the desired carving bit.

CAUTION NOTES:

  • Tighten the bit as tight as much as possible in the CarveTight Spindle to ensure the excess forces don't pull it out.
  • When carving deep on hard woods it is advised to use quality settings Best or Optimal.
  • Be sure to be accurate of your board thickness settings in Designer when using this bit.  Drastic differences in depth from the project board to the real board can result in damage to your bit and machine.
  • This bit is too long to work in the Rock Chuck
  • This bit is not to be used in the Rotary jig.  
    (use the 1/8" long carving bit only for the rotary jig)